产品展厅
产品展厅
ZYTEL?美国杜邦 105F 抗紫外线UV 黑色
?美国杜邦PA66 122耐水解
ZYTEL? 135FNucleated lubricated PA66
增韧
ZYTEL? 114L
ZYTEL? 408
ZYTEL? 450
ZYTEL? 490
Supertough
ZYTEL? ST801
Glass reinforced加纤
ZYTEL? 70G20HSL 20% glass reinforced heat stabilised PA66
ZYTEL? 70G25HSL 25% glass reinforced heat stabilised PA66
ZYTEL? 70G30HSL 30% glass reinforced heat stabilised PA66
ZYTEL? 70G35HSL 35% glass reinforced heat stabilised PA66
ZYTEL? 70G43L 43% glass reinforced PA66
ZYTEL? 70G50HSL 50% glass reinforced heat stabilised PA66
ZYTEL? 70G60HSL 60% glass reinforced heat stabilised PA66 (Black
特殊加纤
ZYTEL? 70G30HSLR 30% glass reinforced heat stabilised hydrolysis resistant PA66
ZYTEL? 70G35HSLX 35% glass reinforced hot oil and grease resistant
ZYTEL? 70GB40HSL 40% glass bead reinforced heat stabilised PA66
Toughened glass reinforced超韧加纤
ZYTEL? 73G15T Toughened 15% glass reinforced PA6
ZYTEL? 73G30T Toughened 30% glass reinforced PA6
ZYTEL? 79G13L Toughened 13% glass reinforced PA66
ZYTEL? 80G14 Toughened 14% glass reinforced PA66
ZYTEL? 80G25 Toughened 25% glass reinforced PA66
ZYTEL? 80G33HS1L Toughened 33% glass reinforced heat stabilised
Flame retardant
ZYTEL? FR7026 V0F Unreinforced PA66 UL94 V0 (0,8 mm)
ZYTEL? FR7200 V0F Unreinforced PA66/6 copolymer, UL94 V0
(0,5 mm) halogen and phosphorous free
ZYTEL? FR70G25 V0 25% glass reinforced PA66, UL94 V0 (0,5 mm)
ZYTEL? FR72G25 V0 25% glass reinforced PA66/6, copolymer
UL94 V0 (0,5 mm)
ZYTEL? FR70M30 V0 30% mineral reinforced PA66, UL94 V0 (1,6 mm)
ZYTEL? FR70M40GW 40% mineral reinforced PA66, glow wire 960°C
High viscosity / Extrusion高粘度 挤出级
ZYTEL? E40 High viscosity PA66 (RV = 95–150)
ZYTEL? E42A High viscosity PA66 (RV = 180–310)
ZYTEL? E50 High viscosity PA66 (RV = 240–470)
ZYTEL? E51HSB High viscosity heat stabilised PA66
(RV = 240–470)
ZYTEL? E53 High viscosity PA66 (RV = 470–600)
ZYTEL? 158 High viscosity PA612
Specialities
ZYTEL? 330 Transparent amorphous nylon
ZYTEL? FN714 PA66 based flexible nylon alloy
ZYTEL? FN718 PA66 based flexible nylon alloy
ZYTEL? FN727 PA6 based flexible nylon alloy
ZYTEL?-KEVLAR? 20% KEVLAR? short fibre reinforced, heat
SFC 70K20HSL stabilised PA66
Mineral reinforced grades
MINLON? 10B140 40% mineral reinforced PA66
MINLON? 11C140 40% mineral reinforced PA66/6 blend.
Toughened and heat stabilised
MINLON? 13T2 30% mineral reinforced PA66. Toughened and
heat stabilised
MINLON? 13MMGY 16% mineral reinforced PA66. Toughened and
heat stabilised
MINLON? 14D1 26% mineral reinforced PA66. Toughened and
UV stabilised (black)
| 物理性能 | 额定值 | 单位制 | 测试方法 |
|---|---|---|---|
| 密度 | 1.60 | g/cm3 | ISO 1183 |
| 收缩率 | ISO 294-4 | ||
| 垂直流动方向 | 0.70 | % | ISO 294-4 |
| 流动方向 | 0.30 | % | ISO 294-4 |
| 机械性能 | 额定值 | 单位制 | 测试方法 |
|---|---|---|---|
| 拉伸模量 | 10600 | MPa | ISO 527-2 |
| 拉伸应力 (断裂) | 158 | MPa | ISO 527-2 |
| 拉伸应变 (断裂) | 2.1 | % | ISO 527-2 |
| 弯曲模量 | 9410 | MPa | ISO 178 |
| 冲击性能 | 额定值 | 单位制 | 测试方法 |
|---|---|---|---|
| 简支梁缺口冲击强度 | ISO 179/1eA | ||
| -40°C | 7.9 | kJ/m2 | ISO 179/1eA |
| 23°C | 8.4 | kJ/m2 | ISO 179/1eA |
| 热性能 | 额定值 | 单位制 | 测试方法 |
|---|---|---|---|
| 热变形温度 (1.8 MPa, 未退火) | 242 | °C | ISO 75-2/A |
| 熔融温度 1 | 260 | °C | ISO 11357-3 |
| 可燃性 | 额定值 | 测试方法 | |
|---|---|---|---|
| 可燃性等级 | IEC 60695-11-10, -20 | ||
| 0.750 mm | V-0 | IEC 60695-11-10, -20 | |
| 1.50 mm | V-0 5VA | IEC 60695-11-10, -20 |
东莞市广裕塑胶原料有限公司专业经营工程塑胶和特种工程塑胶，自公司2002年成立以来，积极倡导“诚信如同生命，口碑重于泰山”的经营理念，以良心做买卖，坚决杜绝损害客户利益的经营行为，在同行和客户中树立了良好的口碑。以珠三角地区为基准，积极开拓市场，业务辐射全国。并与国内外大型塑胶生产商建立了长期友好的合作关系。公司坚持优价薄利多销的原则，愿在商海中与广大客户朋友一道携手共创美好明天。
经营产品： POM，PC,PA66，PPA,PBT,PET,LCP,ABS,EVA，PA9T,PA6T,PA12,PPS,PPO,K胶， PEEK,PPSU,PSU等。
