产品展厅
产品展厅
NYLON RESIN PA66/6T-GF25 FR(40)Zytel® FR95G25V0NH BK458
CHARACTERISTICS
Regional availability
North America
Europe
Asia Pacific
South and Central America
Near East/Africa
Global
Processing
Injection Moulding
Additives
Flame retardant
Special characteristics
Flame retardant
PRODUCT TEXT
Common features of Zytel® nylon resin include mechanical and physical properties such as high mechanical strength, excellent balance of stiffness and toughness, good high temperature performance, good electrical and flammability properties, good abrasion and chemical resistance. In addition, Zytel® nylon resins are available in different modified and reinforced grades to create a wide range of products with tailored properties for specific processes and end-uses. Zytel® nylon resin, including most flame retardant grades, offer the ability to be coloured.
The good melt stability of Zytel® nylon resin normally enables the recycling of properly handled production waste. If recycling is not possible, DuPont recommends, as the preferred option, incineration with energy recovery (-31kJ/g of base polymer) in appropriately equipped installations. For disposal, local regulations have to be observed.
Zytel® nylon resin typically is used in demanding applications in the automotive, furniture, domestic appliances, sporting goods and construction industry.
Zytel® FR95G25V0NH BK458 is a 25% glass fiber reinforced, flame retardant polyamide 66/6T resin for injection molding. It is halogen and red phosphorous free, has high flow characteristics and .
DRY/COND.
TEST NORM
Resin Identification
PA66/6T-GF25FR(40)
ISO 1043
Part Marking Code
>PA66/6T-GF25FR(40)<
ISO 11469
ISO designation
ISO 16396-PA66/6T,GF25 FR(40),M1CF1G,S12-090
-
DRY/COND.
UNIT
TEST NORM
Melt volume-flow rate
32/*
cm3/10min
ISO 1133
Temperature
275/*
°C
ISO 1133
Load
5/*
kg
ISO 1133
Moulding shrinkage, parallel
0.1/-
%
ISO 294-4, 2577
Moulding shrinkage, normal
0.6/-
%
ISO 294-4, 2577
DRY/COND.
UNIT
TEST NORM
Tensile Modulus
8900/8700
MPa
ISO 527-1/-2
Stress at break
109/90
MPa
ISO 527-1/-2
Strain at break
2.2/2.2
%
ISO 527-1/-2
Flexural Modulus
8500/8400
MPa
ISO 178
Flexural Strength
185/165
MPa
ISO 178
Charpy impact strength, 23°C
35/31
kJ/m2
ISO 179/1eU
Charpy notched impact strength, 23°C
4.6/-
kJ/m2
ISO 179/1eA
Charpy notched impact strength, -30°C
4.5/-
kJ/m2
ISO 179/1eA
Charpy notched impact strength, -40°C
4.5/-
kJ/m2
ISO 179/1eA
Poisson's ratio
0.34/0.34
-
-
