产品展厅
产品展厅
MINERAL REINFORCED NYLON RESIN PA66-MD40Minlon® 10B140 BK061
CHARACTERISTICS
Regional availability
Europe
Near East/Africa
Processing
Injection Moulding
Delivery form
Pellets
Additives
Release agent
PRODUCT TEXT
Common features of Minlon® nylon resin include mechanical and physical properties such as high mechanical strength, excellent balance of stiffness /toughness, good high temperature performance, good chemical resistance, paintability, dimensional stability and low warpage.
Grades with improved electrical and flammability properties are available within the Zytel® nylon resin product line. In addition, Minlon® nylon resin is available in different modified and reinforced grades to create a wide range of products with tailored properties for specific processes and end-uses.
The good melt stability of Minlon® nylon resin normally enables the recycling of properly handled production waste. If recycling is not possible, DuPont recommends, as the preferred option, incineration with energy recovery (-31kJ/g of base polymer) in appropriately equipped installations. For disposal, local regulations have to be observed.
Minlon® nylon resin typically is used in demanding applications in the automotive, electrical, electronic, domestic appliances and construction industries.
Minlon® 10B140 BK061 is a 40% mineral reinforced, black polyamide 66 resin for injection moulding. It has very low warpage.
DRY/COND.
TEST NORM
Resin Identification
PA66-MD40
ISO 1043
Part Marking Code
>PA66-MD40<
ISO 11469
ISO designation
ISO 16396-PA66,MD40,M1CGR,S14-070
-
DRY/COND.
UNIT
TEST NORM
Viscosity number
138/*
cm3/g
ISO 307, 1157, 1628
Moulding shrinkage, parallel
1.0/-
%
ISO 294-4, 2577
Moulding shrinkage, normal
1.1/-
%
ISO 294-4, 2577
DRY/COND.
UNIT
TEST NORM
Tensile Modulus
6600/3800
MPa
ISO 527-1/-2
Stress at break
82/54
MPa
ISO 527-1/-2
Strain at break
3.5/9
%
ISO 527-1/-2
Tensile creep modulus, 1h
*/2100
MPa
ISO 899-1
Tensile creep modulus, 1000h
*/1300
MPa
ISO 899-1
Charpy impact strength, 23°C
35/60
kJ/m2
ISO 179/1eU
Charpy impact strength, -30°C
25/25
kJ/m2
ISO 179/1eU
Charpy notched impact strength, 23°C
3.5/4.5
kJ/m2
ISO 179/1eA
Charpy notched impact strength, -30°C
3.5/2
kJ/m2
ISO 179/1eA
Izod notched impact strength, 23°C
3.5/4
kJ/m2
ISO 180/1A
Poisson's ratio
0.35/0.36
-
-
