产品展厅
产品展厅
MINERAL REINFORCED NYLON RESIN PA66-MD40Minlon® 10B40 NC010
CHARACTERISTICS
Regional availability
North America
Asia Pacific
South and Central America
Processing
Injection Moulding
PRODUCT TEXT
Common features of Minlon® nylon resin include mechanical and physical properties such as high mechanical strength, excellent balance of stiffness /toughness, good high temperature performance, good chemical resistance, paintability, dimensional stability and low warpage.
Grades with improved electrical and flammability properties are available within the Zytel® nylon resin product line. In addition, Minlon® nylon resin is available in different modified and reinforced grades to create a wide range of products with tailored properties for specific processes and end-uses.
The good melt stability of Minlon® nylon resin normally enables the recycling of properly handled production waste. If recycling is not possible, DuPont recommends, as the preferred option, incineration with energy recovery (-31kJ/g of base polymer) in appropriately equipped installations. For disposal, local regulations have to be observed.
Minlon® nylon resin typically is used in demanding applications in the automotive, electrical, electronic, domestic appliances and construction industries.
Minlon® 10B40 NC010 is a 40% mineral reinforced polyamide 66 resin for injection moulding.
DRY/COND.
TEST NORM
Resin Identification
PA66-MD40
ISO 1043
Part Marking Code
>PA66-MD40<
ISO 11469
ISO designation
ISO 16396-PA66,MD40,M1GN,S14-100
-
DRY/COND.
UNIT
TEST NORM
Moulding shrinkage, parallel
0.5/-
%
ISO 294-4, 2577
Moulding shrinkage, normal
0.9/-
%
ISO 294-4, 2577
DRY/COND.
UNIT
TEST NORM
Tensile Modulus
9600/5400
MPa
ISO 527-1/-2
Stress at break
92/58
MPa
ISO 527-1/-2
Strain at break
2.5/8
%
ISO 527-1/-2
Flexural Modulus
9000/4800
MPa
ISO 178
Tensile creep modulus, 1h
*/2500
MPa
ISO 899-1
Tensile creep modulus, 1000h
*/1600
MPa
ISO 899-1
Charpy impact strength, 23°C
25/40
kJ/m2
ISO 179/1eU
Charpy impact strength, -30°C
18/17
kJ/m2
ISO 179/1eU
Charpy notched impact strength, 23°C
3/3
kJ/m2
ISO 179/1eA
Charpy notched impact strength, -30°C
2/2
kJ/m2
ISO 179/1eA
Charpy notched impact strength, -40°C
2/2
kJ/m2
ISO 179/1eA
Izod notched impact strength, 23°C
3.5/4
kJ/m2
ISO 180/1A
Izod notched impact strength, -30°C
2.5/2
kJ/m2
ISO 180/1A
Izod notched impact strength, -40°C
2.5/2
kJ/m2
ISO 180/1A
Izod impact strength, 23°C
25/40
kJ/m2
ISO 180/1U
Izod impact strength, -30°C
18/18
kJ/m2
ISO 180/1U
Poisson's ratio
0.34/0.35
-
-
