Zytel® 103FHS BKB009

CHARACTERISTICS

Regional availability

• North America

• Europe

• Asia Pacific

• South and Central America

• Near East/Africa

• Global

Processing

Injection Moulding

Special characteristics

Heat stabilised or stable to heat

PRODUCT TEXT

Common features of Zytel® nylon resin include mechanical and physical properties such as high mechanical strength, excellent balance of stiffness and toughness, good high temperature performance, good electrical and flammability properties, good abrasion and chemical resistance. In addition, Zytel® nylon resins are available in different modified and reinforced grades to create a wide range of products with tailored properties for specific processes and end-uses. Zytel® nylon resin, including most flame retardant grades, offer the ability to be coloured.

The good melt stability of Zytel® nylon resin normally enables the recycling of properly handled production waste. If recycling is not possible, DuPont recommends, as the preferred option, incineration with energy recovery (-31kJ/g of base polymer) in appropriately equipped installations. For disposal, local regulations have to be observed.

Zytel® nylon resin typically is used in demanding applications in the automotive, furniture, domestic appliances, sporting goods and construction industry.

Zytel® 103FHS BKB009 is a heat stabilised, internally lubricated polyamide 66 resin for injection moulding. It was developed for fast cycles and high productivity.

PRODUCT INFORMATION

DRY/COND.

TEST NORM

Resin Identification

PA66

ISO 1043

Part Marking Code

>PA66<

ISO 11469

ISO designation

ISO 16396-PA66,,M1CG1HR,S14-030

-

RHEOLOGICAL PROPERTIES

DRY/COND.

UNIT

TEST NORM

Viscosity number

150/*1

cm3/g

ISO 307, 1157, 1628

Moulding shrinkage, parallel

1.3/-

%

ISO 294-4, 2577

Moulding shrinkage, normal

1.3/-

%

ISO 294-4, 2577

1: Sulfuric acid 96%

MECHANICAL PROPERTIES

DRY/COND.

UNIT

TEST NORM

Tensile Modulus

3100/-

MPa

ISO 527-1/-2

Yield stress

85/-

MPa

ISO 527-1/-2

Yield strain

4.3/-

%

ISO 527-1/-2

Nominal strain at break

15/-

%

ISO 527-1/-2

Flexural Modulus

2800/-

MPa

ISO 178

Charpy impact strength, 23°C

250/-

kJ/m2

ISO 179/1eU

Charpy notched impact strength, 23°C

5/-

kJ/m2

ISO 179/1eA

Charpy notched impact strength, -30°C

4/-

kJ/m2

ISO 179/1eA

Izod notched impact strength, 23°C

5/-

kJ/m2

ISO 180/1A

Izod notched impact strength, -40°C

5/-

kJ/m2

ISO 180/1A

Izod impact strength, 23°C

200/-

kJ/m2

ISO 180/1U

Poisson's ratio

0.37/-

-

-

THERMAL PROPERTIES

DRY/COND.

UNIT

TEST NORM

Melting temperature, 10°C/min

262/*

°C

ISO 11357-1/-3

Temp. of deflection under load, 1.8 MPa

70/*

°C

ISO 75-1/-2

Temp. of deflection under load, 0.45 MPa

195/*

°C

ISO 75-1/-2

RTI, electrical, 0.75mm

140

°C

UL 746B

RTI, electrical, 1.5mm

140

°C

UL 746B

RTI, electrical, 3mm

140

°C

UL 746B

RTI, impact, 0.75mm

95

°C

UL 746B

RTI, impact, 1.5mm

110

°C

UL 746B

RTI, impact, 3mm

110

°C

UL 746B

RTI, strength, 0.75mm

115

°C

UL 746B

RTI, strength, 1.5mm

125/*

°C

UL 746B

RTI, strength, 3mm

125

°C

UL 746B

FLAMMABILITY

DRY/COND.

UNIT

TEST NORM

Burning Behav. at 1.5mm nom. thickn.

V-2/*

class

IEC 60695-11-10

Thickness tested

1.5/*

mm

IEC 60695-11-10

UL recognition

yes/*

-

UL 94

Burning Behav. at thickness h

V-2/*

class

IEC 60695-11-10

Thickness tested

0.71/*

mm

IEC 60695-11-10

UL recognition

yes/*

-

UL 94

Glow Wire Flammability Index, 0.75mm

850/-

°C

IEC 60695-2-12

Glow Wire Flammability Index, 1.5mm

960/-

°C

IEC 60695-2-12

Glow Wire Flammability Index, 3mm

960/-

°C

IEC 60695-2-12

Glow Wire Ignition Temperature, 0.75mm

725/-

°C

IEC 60695-2-13

Glow Wire Ignition Temperature, 1.5mm

725/-

°C

IEC 60695-2-13

Glow Wire Ignition Temperature, 3mm

725/-

°C

IEC 60695-2-13

FMVSS Class

DNI

-

ISO 3795 (FMVSS 302)

OTHER PROPERTIES

DRY/COND.

UNIT

TEST NORM